You are here

设备

反应器内构件

  • Topsoe Catalyst Support
    设备

    催化剂载体

    我们的催化剂载体用于支撑催化剂、载体材料和油的整体重量。 它还能承受整个催化周期内催化剂床层产生的压降。 Inverted support beams support the catalyst grid to minimize inactive reactor volume.倒转的支撑梁能够支撑催化剂格栅,进而减少反应器的非活跃体积。 Removable catalyst screens increase maintenance flexibility and minimized gasket requirements reduce maintenance time...
  • Topsoe Inlet diffuser
    设备

    入口扩散器

    我们的入口扩散器针对每一台装置进行定制优化设计,您的反应器流程参数和几何形状都是我们的考虑因素。 Inlet Diffusers are designed to uniformly deliver gas and liquid to the distribution tray below, while keeping the liquid on the tray level.入口扩散器能够将气体和液体均匀地传送至下方的分布塔盘,同时将液体保持在塔盘的高度。 Installation point of the Inlet Diffuser
  • Topsoe Compression Ring Quench Mixer
    设备

    冷氢混合器

    我们的激冷混合器能够有效混合来自激冷流以及激冷流上方的催化剂床层液体。 Depending on the specific unit requirements, we offer three mixer types:根据具体的装置要求,我们提供三种类型的混合器: Vortex涡流 Compression Ring Torus™ Our Quench Mixers are designed to achieve optimal mixing during all phases, while minimizing the pressure drop over the mixer...
  • Topsoe Outlet Collector
    设备

    出口收集器

    我们的出口收集器能够在底部床层确保均匀的分布,不仅最大程度提高催化剂的利用率,而且防止床层向下游管道和设备偏移。 Topsoe Outlet Collector in the reactor Installation point of the Outlet Collector Pressure drop profile over the bottom bed
  • Topsoe Vapor Lift Distributor Tray (VLT)
    设备

    分布塔盘

    我们的汽提分布塔盘(VLT)能够将液体和气体均匀地分布在催化剂床层的整个横截面上。 The tray is equipped with an unmatched number of dripping points, enabling uniform wetting of the catalyst below.塔盘配备的滴点数量极多,能够均匀地湿润下方的催化剂。 Our Box VLT consists of a self-supportive structure, which both renders beams obsolete and diminishes tray deflexion...
  • Topsoe Redistribution Tray
    设备

    分布塔盘

    我们的分布塔盘可确保将混合液均匀分布至下方的催化剂床层。 The Redistribution Trays are individually optimized for each quench section to match the changes in flow and process conditions after each of the catalyst beds. 分布塔盘针对每一个激冷工段进行单独优化,以满足每一个催化剂床层之后的流程和工艺条件变化。 Installation point of the Redistribution Tray Redistribution...
  • Topsoe Liquid Phase Scale Catcher
    设备

    氧化皮收集器

    加氢反应器的一个常见问题是各种颗粒物堵塞催化剂床层,导致压降积聚。 Consequently, many units are forced to go off-stream and terminate production as pressure drops approach the maximum allowable for the unit.随着压降逐渐接近装置的最大承受极限,许多装置因此而不得不停车停产。 Our Scale Catching technology is a proven and economically feasible solution to delay...