You are here

Equipment

Steam Reformers

  • Topsoe Autothermal reformer
    Equipment

    Air-fired Secondary Reformer

    The air-fired secondary reformer is essential in natural gas-based ammonia plants as it is the simplest way of introducing the nitrogen required for ammonia synthesis. Unlike the upstream tubular primary reformer, the secondary reformer is adiabatic, and the operating conditions are more severe...
  • Ekstroem
    Equipment

    Convection Reformer HTCR

    Haldor Topsoe Convection Reformer™ (HTCR) technology is a compact, high-efficiency heat exchange reformer that provides refinery operators with a straightforward, inexpensive way to meet the growing demand for hydrogen.
  • HTER Haldor Topsoe Heat Exchange Reformer
    Equipment

    Heat Exchange Reformer (HTER)

    The introduction of gas heated reforming for synthesis gas production will enable you to effectively utilize the valuable heat in the reformer effluent to create more reforming capacity. The Topsoe HTER can be used in combination with an autothermal reformer (ATR), with a tubular reformer (SMR), or...
  • Topsoe Autothermal reformer
    Equipment

    Oxygen-fired Secondary Reformer

    In large-scale methanol plants, each added day of operation is worth as much as a million euros. Plant reliability and availability are of utmost importance. Meeting these needs requires continuous equipment development and process optimization. One of the important pieces of equipment used in the...
  • SynCOR™ - Autothermal Reformer (ATR)
    Equipment

    SynCOR™ - Autothermal Reformer (ATR)

    Autothermal reforming at low steam-to-carbon ratio The majority of the world’s syngas-producing plants apply steam methane reforming, with the specific type of reforming technology depending on application and operating conditions. Topsoe offers several types of reforming technologies and has...
  • Topsoe Autothermal reformer
    Equipment

    Topsoe Bayonet Reformer (TBR)

    The Topsoe Bayonet Reformer TBR combines the novel properties of convection and radiant heat transfer in one steam reformer. The development and introduction of the TBR is a result of Topsoe’s continuous striving towards more energy efficient ways of producing hydrogen by steam reforming of...
  • Topsoe Autothermal reformer
    Equipment

    Tubular radiant wall steam reformer

    The radiant wall steam reformer consists of a number of catalyst tubes in a single line in one or two fired boxes with burners placed at the walls at several elevations. The burner flames are directed backwards against the furnace wall, eliminating any risk of flame impingement of the catalyst...

Burners

  • Equipment

    FreeBurn™ for secondary reformers

    The FreeBurn™ is a new generation of secondary reformer burners and provide our customers in the ammonia industry optimized performance in their plants and improved business economics. This new burner gives a perfectly homogeneous admission of the process air and ensures a gas mixture which is...
  • Equipment

    Secondary Reformer Burner

    As demands on reliability, capacity and energy efficiency increase, higher performance is required from each and every piece of equipment in your plant. In ammonia production, this includes the air-fired secondary reformer, which is already subjected to severe operating conditions in the plant. To...
  • CTS™ burner - autothermal reformer
    Equipment

    SynCOR™ CTS™ burner

    The CTS™ (Cool Tip Swirl) burner is a crucial piece of equipment, and its importance in reformer reliability and availability cannot be underestimated. Good burner performance is characterized by: Short and centralized flame Low metal temperatures on burner nozzles Soot-free operation Easy...

Boilers

  • Equipment

    Waste Heat Boiler (Ammonia Loop)

    The recovery of heat from the synthesis gas exiting an ammonia converter gives specific challenges due to the high pressures and the high hydrogen and ammonia contents. The gas cooling and heat recovery are best taken care of in a loop boiler and the design of this boiler must address the special...

Reactor Internals

  • Bottom Support Grid
    Equipment

    Adiabatic Reactor Bottom Support Grid

    Increase your profitability with Topsoe’s support grid to obtain a lower pressure drop in your adiabatic reactors such as the high, medium, low-temperature shift or the methanator. Achieve a pressure drop which is up to 50% lower. Worldwide, more than 20 reactors already have this technology...
  • Ammonia converter
    Equipment

    Ammonia Converter Baskets S-200

    Topsoe S-200 converter Topsoe was the first technology licensor to introduce the multibed radial flow converter design, thereby improving conversion per pass compared to known technology. The Topsoe S-200 ammonia synthesis converter is a two-bed radial flow converter with indirect cooling between...
  • Ammonia converter
    Equipment

    Ammonia Converter Baskets S-300

    Topsoe S-300 converter Topsoe’s S-300 converter is the latest development in Topsoe’s ammonia converter portfolio and is the recommended converter design for all new plants. The advantages of the S-300 radial flow converter are proven by more than 50 installations world - wide, making it the...
  • Ammonia converter
    Equipment

    Ammonia Converter Baskets S-50

    Topsoe S-50 converter The Topsoe S-50 converter is a single bed radial flow converter, which is added downstream of the main converter in series to increase ammonia conversion. The S-50 converter is designed in two versions: a hot shell and a cold shell version. The hot shell version This design...
  • Catalyst bed support structure
    Equipment

    Catalyst bed support structure

    The catalyst bed support in the SynCOR™ unit serves both as structural support for the catalyst bed and as an outlet flow distributor guiding the syngas from the catalyst bed into the transfer line to the waste heat recovery system downstream the reformer.

Other

  • HTZR™ target tiles
    Equipment

    HTZR™ target tiles

    Topsoe’s SynCOR™ unit incorporates a floor of zirconium-based ceramic target tiles, HTZR™, as an integral part of the reactor design. The purpose of the HTZR™ target tiles is to: Act as the partition between the combustion chamber and the catalyst bed Protect the catalyst from any direct impact...
  • Reactor refractory lining
    Equipment

    Reactor refractory lining

    The SynCOR™ pressure shell is manufactured from low-alloy steel. It is protected against the extremely harsh operating conditions in the combustion chamber by an internal lining of a multi-layer refractory. The lining is exposed to extremely high temperature and radiation intensity from the...
  • TFM
    Equipment

    Topsoe Furnace Manager TFM

    How often do you physically examine your furnace? Wouldn’t it be helpful to have access to an up-to-date tube wall temperature and a picture of every burner whenever you need it, from the safety of your control room? Well now you can, thanks to Topsoe Furnace Manager. On-line monitoring will...