Catalysts

AR-401

Prereduced prereforming catalyst suitable for feedstocks ranging from natural gas to naphtha.

MCR-8

Prereduced SNG methanation catalyst for medium to high temperature applications.

BMC

Platinum free Base Metal Coating

CK-302

Base metal pellet catalyst

CK-304

Possess a high activity for oxidation of CO and short chained aliphatic compounds

CK-305

Tailor-made for the catalytic combustion of halogenated hydrocarbons

CK-306

Where CO conversion is required in addition to catalytic combustion of chlorinated hydrocarbons.

CK-307

This catalyst is sulfur tolerant and can be used for most applications

CK-322

Preferred choice for applications using organic bound silicon like anti-foaming agents

CK-395

Exceptional halogen tolerance - excellent oxidation performance

CK-428

Tailor-made for the catalytic combustion of sulfur compounds in off-gasses

CKA-3

Promoted alumina-based catalyst used for hydrolysis of carbonyl sulfide (COS)

CKM-3324

A cost effective solutions in many applications and are widely used in the chemical industry, drying or coating processes.

DME-99 ECO™

Dimethyl ether synthesis catalyst

DNOC

Tailor-made for the catalytic combustion of CO and ammonia, with a high selectivity towards nitrogen (N2)

FK-2

Used for selective oxidation of methanol to formaldehyde

GCC-2

Used for gas conditioning (GCC) in SNG plants

GSSK

Used to protect the downstream sour shift catalyst from dust and other impurities

HTZ-3

High purity zinc oxide absorbent for high sulfur feedstocks.

HTZ-31

State-of-the-art promoted zinc oxide absorbent for high sulfur feedstocks.

HTZ-5

High purity zinc oxide absorbent for low sulfur feedstocks or low temperature operation.

HTZ-51

State-of-the-art promoted zinc oxide absorbent for low sulfur feedstocks or low temperature operation.

KM1

Iron-based ammonia synthesis catalyst containing a number of carefully selected promoters.

KM 111

Iron-based ammonia synthesis catalyst optimized for the lower bed(s) of the converter.

KM1R

Prereduced iron-based ammonia synthesis catalyst containing a number of carefully selected promoters.

KMR 111

Prereduced iron-based ammonia synthesis catalyst optimized for the lower bed(s) of the converter.

LK-801

Topsoe’s first generation low temperature shift (LTS) catalyst based on Cu/Zn/Al.

LK-813

MTS catalyst used as a middle layer in medium temperature shift (MTS) reactors.

LK-819

MTS catalyst used in the bottom part of medium temperature shift (MTS) reactors.

LK-821-2

High activity low temperature shift (LTS) catalyst which is the most widely used LTS catalyst in the world.

LK-823

Low temperature shift (LTS) catalyst promoted to suppress methanol by-product formation.

LK-853 FENCE™

Latest generation low temperature shift (LTS) catalyst which offers superior performance.

LSK-2

Guard catalyst used for protecting downstream MTS or LTS catalysts from chlorine poisoning.

MCR-2

Prereduced SNG methanation catalyst for medium to high temperature applications.

MCR-2X

Prereduced SNG methanation catalyst for high temperature applications.

MK-121

Well-proven methanol synthesis catalyst suitable for all types of methanol reactors.

MK-151 FENCE™

High activity methanol synthesis catalyst suitable for all types of methanol reactors.

MK-317 SUSTAIN™

High performance methanol synthesis catalyst suitable for production of renewable methanol.

PK-5

Ring-shaped methanation catalyst used in ammonia and hydrogen plants.

PK-7R

Prereduced ring-shaped methanation catalyst used in ammonia, hydrogen and SNG plants.

R-67-7H

High activity reforming catalyst used for tubular reforming.

R-67R-7H

Prereduced high activity reforming catalyst used for tubular reforming.

R-87R HEAT-X™

Prereduced high activity reforming catalyst for heat exchange applications.

RK-201

Low alkali promoted reforming catalyst used for tubular reforming of feedstocks ranging from natural gas to naphtha.

RK-202

High alkali promoted reforming catalyst used for tubular reforming of naphtha feedstocks.

RK-21 HEAT-X™

Alkali promoted reforming catalyst for heat exchange applications

RK-211

Prereduced low alkali promoted reforming catalyst used for tubular reforming of feedstocks ranging from natural gas to naphtha.

RK-212

Prereduced high alkali promoted reforming catalyst used for tubular reforming of naphtha feedstocks.

RK-400

Latest generation low alkali promoted reforming catalyst used for feedstocks ranging from natural gas to LPG.

RK-400R

Latest generation prereduced low alkali promoted reforming catalyst used for feedstocks ranging from natural gas to LPG.

RKA-02

Top layer catalyst for oxygen-fired secondary and autothermal reforming.

RKS-2

Top layer catalyst for secondary and autothermal reforming.

RKS-2-7H

Bulk catalyst for secondary and autothermal reforming.

SK-201-2

Copper promoted iron/chromium based high temperature shift (HTS) catalyst with ultra-low hexavalent chromium levels.

SSK-10

Cobalt-molybdenum (CoMo)-based sour shift catalyst for HTS, MTS and LTS applications.

ST-201

Copper and zinc oxide-based absorbent for removal of hydrogen sulfide and organic sulfur compounds.

TK-10

TK-10 is an inert hold-down catalyst applicable as topping layer in catalytic reactors instead of spherical material.

TK-15

TK-15 is specifically designed for units experiencing high gas rates or carry-over of coke spalled from the heater or heat exchange train.

TK-220

TK-220 is a CoMo catalyst that is specifically developed for treating tail gases derived from Claus or other similar units.

TK-222

TK-222 is a CoMo catalyst specifically developed for treating tail gases derived from Claus or other similar units.

TK-224

TK-224 is a CoMo catalyst that is specifically developed for treating tail gases derived from Claus or other similar units.

TK-240

Well-proven CoMo-based hydrogenation catalyst used in ammonia, methanol and hydrogen plants.

TK-250

Ring-shaped CoMo-based hydrogenation catalyst used in ammonia, methanol and hydrogen plants.

TK-261

High activity NiMo-based hydrogenation catalyst used in ammonia, methanol and hydrogen plants.

TK-30

TK-30 is a high purity alumina catalyst shaped as rings or extrudates.

TK-335

TK-335 is developed for fixed-bed HDO service.

TK-337

TK-337 is developed for fixed-bed hydrodeoxygenation (HDO) service.

TK-339

TK-339 is developed for fixed-bed hydrodeoxygenation (HDO) service.

TK-340

TK-340 is developed for fixed-bed hydrodeoxygenation (HDO) service.

TK-341

TK-341 is developed for fixed-bed hydrodeoxygenation (HDO) service.

TK-359

TK-359 is developed for fixed-bed hydrodeoxygenation (HDO) service.

TK-441 SiliconTrap™

TK-441 SiliconTrap™ is a high surface area catalyst for desulfurization of coker naphthas containing up to 11 ppm silicon.

TK-447 SiliconTrap™

TK-447 SiliconTrap™ is a very high surface area catalyst for silicon pick-up and desulfurization of coker naphtha feedstock.

TK-449 SiliconTrap™

TK-449 SiliconTrap™ has the highest silicon pick-up capacity of all the TK-400 series catalysts.

TK-453 SiliconTrap™

TK-453 SiliconTrap™ is a NiMo catalyst with very high rates for removal of metals (Ni, V, Fe) and silicon.

TK-49

TK-49 is a high-nickel catalyst based on an alumina carrier.

TK-553

TK-553 is a NiMo catalyst especially developed for color removal (post-treatment) in ultra-low sulfur diesel (ULSD) units operated at relatively high temperatures, where color species may be formed.

TK-560 BRIM®

TK-560 BRIM® is a high activity CoMo catalyst with a low metal loading and filling density.

TK-562 BRIM®

Catalyst specifically developed for Fluid Catalytic Cracking (FCC) pretreatment applications.

TK-568 BRIM®

TK-568 BRIM® is a new generation BRIM® catalyst specifically developed for ultra-low sulfur diesel (ULSD) and kerosene applications.

TK-569 HyBRIM™

TK-569 HyBRIM™ belongs to the new generation of extremely high-active catalysts based on the novel HyBRIM™ technology.

TK-570 BRIM®

TK-570 BRIM® is a new generation BRIM® catalyst specifically developed for ultra-low sulfur diesel applications.

TK-578 BRIM®

TK-578 BRIM® is a new generation BRIM® catalyst which has significantly higher activity than the past generation of catalysts for ultra-low sulfur diesel (ULSD) production (less than 10 wt ppm sulfur).

TK-609 HyBRIM™

TK-609 HyBRIM™ is a new generation, high-activity NiMo catalyst based on the novel HyBRIM™ technology

TK-709

TK-709 is a high-surface area, low-activity catalyst with high hydrodemetallization (HDM) activity and metal storage capacity.

TK-710 HyOctane™

TK-710 HyOctane™ is a CoMo type catalyst with moderate hydrodesulfurization (HDS) activity, limited loss of octane, high hydrodemetallization (HDM) activity and metal storage capacity.

TK-711

TK-711 is a catalyst with high hydrodemetallization (HDM) activity, metal storage capacity and moderate hydrodesulfurization (HDS) activity.

TK-719

TK-719 is a high-porosity demetallization catalyst for fixed-bed resid service.

TK-733

TK-733 is a demetallization (HDM) catalyst with moderate hydrodesulfurization (HDS) activity for fixed-bed resid service.

TK-743

TK-743 is a demetallization catalyst with moderate hydrodesulfurization (HDS) activity for fixed-bed resid service and vacuum gas oil (VGO) hydrotreating.

TK-747 HyOctane™

TK-747 HyOctane™ is a catalyst with a high nickel content specifically developed for Fluid Catalytic Cracking (FCC) gasoline post-treating that ensures minimum octane loss and reduces mercaptans in the product.

TK-902

TK-902 is a high-nickel catalyst based on an alumina carrier. Being in a reduced form, it utilizes ...

TK-753

TK-753 is a transition catalyst in fixed-bed resid hydrodesulfurization (HDS) systems.

TK-773

TK-773 is a final-stage catalyst for fixed-bed resid hydrodesulfurization (HDS) units.

TK-831

TK-831 provides high hydrodemetallization (HDM) activity, metal storage capacity and moderate hydrodesulfurization (HDS) and hydrodenitrogenation (HDN) activity.

TK-907

TK-907 is an alumina-based noble metal catalyst, specifically designed to make a low aromatic ...

TK-911

TK-911 is our enhanced activity version of TK-907. TK-911 utilizes an optimized carrier system to ...

TK-915

TK-915 is the premium-activity hydrodearomatization HDA catalyst. It exhibits a greater tolerance ...

TK-921

TK-921 is part of Topsoe’s hydrocracking red series developed for maximum hydrogenation. This is an ...

TK-925

TK-925 is part of Topsoe’s hydrocracking red series developed for maximum hydrogenation. This is a ...

TK-927

TK-927 is a NiW-based hydrocracking catalyst optimized for maximum production of middle distillate ...

TK-926

TK-926 is part of Topsoe’s hydrocracking blue series, developed for maximum cold ﬂow properties of ...

TK-928

TK-928 is specifically designed for cold-flow improvement (dewaxing) of diesel, renewable diesel ...

TK-931

TK-931 is part of Topsoe’s hydrocracking red series developed for maximum hydrogenation. It is a ...

TK-932

TK-932 is specifically designed for cold-flow improvement (dewaxing) of nitrogen-containing diesel, ...

TK-935

Topsoe Catalyst

TK-939 D-sel™

TK-939 D-sel™ is part of Topsoe’s hydrocracking D-sel™ series for maximum diesel yields. TK-939 ...

TK-969 D-sel™

TK-969 D-sel™ is a zeolitic NiW based hydrocracking catalyst with very high activity and a high ...

TK-941

TK-941 is part of Topsoe’s hydrocracking red series developed for maximum hydrogenation. TK-941 has ...

TK-943

TK-943 is part of Topsoe’s hydrocracking blue series developed for maximum cold ﬂow properties of ...

TK-971

TK-971 is a zeolitic NiW-based hydrocracking catalyst with very high activity. TK-971 provides ...

TK-947

TK-947 is part of Topsoe’s hydrocracking red series developed for maximum hydrogenation. TK-947 is ...

TK-951

TK-951 is part of Topsoe’s hydrocracking red series developed for maximum hydrogenation. TK-951 is ...

VK59

VK59 is a cesium-promoted catalyst optimized for medium to high strength SO2 gasses with continuous ...

VK38

The VK38 formulation provides excellent activity over a wide range of operating conditions. VK38 is ...

VK48

VK48 is a high vanadium version of the standard all-round VK38 catalyst. The catalyst composition ...

VK69

VK69 is designed specifically for the final pass(es) of double absorption plants. In the lean SO2 ...

VK-701 LEAP5™

LEAP5™ catalysts are specifically designed for oxidizing SO3-strong gases, and are ideal for use in ...

VK-WH

VK-WH is a cesium-promoted catalyst designed for continuous operation down to 370°C/700°F in ...

VK-WL

VK-WL is a cesium-promoted catalyst designed for continuous operation down to 370°C/700°F in lean ...

VK-WSA

The VK-WSA formulation offers excellent activity over a wide range of operating conditions and can ...

VK-WSX

The VK-WSX formulation was developed to offer higher activity in SO2 gasses that are more than 90% ...

GSK-10

Gasoline synthesis TIGAS

VK-WD

VK-WD is optimized for lean SO2+SO3 gases, such as in a SNOX™ plant or in the bed(s) after the ...

TK-26 TopTrap™

TK-26 TopTrap™ is an inert macro-porous material designed to pick up iron scale and other contaminants.

TK-455 MultiTrap™

TK-455 MultiTrap™ is a large pore, high-porosity catalyst for trapping silicon and phosphorus in gasoil and vacuum gas oil (VGO) feeds.

RA-67-7H

Reforming catalyst promoted for low ammonia formation used for tubular reforming.

R-87 HEAT-X™

High activity reforming catalyst for heat exchange applications.

CataFlex™

A patent-pending catalyst-coated filter bag designed to treat off-gasses in high-dust environments found in a wide range of industries and activities.

TK-527

Topsoe developed a high-active naphtha catalyst designated TK-527.

FK-100

Formaldehyde synthesis catalyst

HTG-2

Alumina-based chloride absorbent used for removal of hydrogen chloride in gaseous or liquid streams.

SC-201R

Nickel-based absorbent used for the removal of sulfur components from hydrocarbon feedstocks at low temperatures

SC-501 Purify™

Developed for an efficient and reliable removal of hydrogen sulfide from gas and liquid hydrocarbon feedstocks at low temperatures

TK-961

TK-961 is part of Topsoe’s hydrocracking red series developed for maximum hydrogenation. TK-961 is ...

TK-901

TK-901 is a high-nickel catalyst based on an alumina carrier.

TK-602 HyBRIM™

TK-602 HyBRIM™ belongs to the new generation of extremely high-active catalysts based on the novel HyBRIM™ technology.

TK-565 HyBRIM™

TK-565 HyBRIM™ belongs to the new generation of extremely high-active catalysts based on the novel HyBRIM™ technology.

TK-41

TK-41 has very high affinity for arsenic trapping in VGO and gas oil services, where it is also able to trap Ni/V/Si.

SH-501

A high-nickel catalyst based on an alumina carrier

SK-501 Flex™

High temperature shift catalyst The groundbreaking new formulation based on zinc and aluminum gives ...

TK-949 D-sel™

TK-949 D-sel™ is part of Topsoe’s hydrocracking D-sel™ series for maximum diesel yields. TK-949 ...

TK-611 HyBRIM™

TK-611 HyBRIM™ is the latest generation, high-activity NiMo catalyst based on the novel HyBRIM™ technology.

TK-361

TK-361 is developed for fixed bed hydrodeoxygenation (HDO) service. The catalyst is typically ...

TK-703 HyOctane™

TK-703 HyOctane™ is the specially developed catalyst for selective hydrogenation units in FCC naphtha post-treatment.

HTG-10

Potassium and alumina-based high capacity chloride absorbent used for removal of hydrogen chloride in gaseous streams.

MG-921

Guard catalyst used for protecting methanol synthesis catalyst from impurities such as iron, sulfur and chlorine.

MDK-20

Methanol decomposition catalyst used in small-scale hydrogen plants.

MDK-15

Guard catalyst used for methanol decomposition in small-scale hydrogen plants.

TK-20

Shape-optimized guard material used for protecting shift catalysts from dust and other impurities.

RKA-10

Noble metal-promoted top layer catalyst for oxygen-fired secondary and autothermal reforming.

TertiNOx™

Raise the bar on N2O abatement with TertiNOx™ Reducing N2O emissions from nitric acid units is a ...

TopFrax™

TopFrax™ catalytic ceramic filter TopFrax™ is a patent-pending catalyst-coated ceramic filter ...

TK-930 D-wax™

TK-930 D-wax™ is an isomerization selective dewaxing catalyst, specifically designed for ...

TK-920 D-wax™

TK-920 D-wax™ is specifically designed for dewaxing of hydrotreated gas oil and renewable diesel in ...

VK-711 LEAP5™

LEAP5™ catalysts are specifically designed for oxidizing SO3-strong gases, and are ideal for use in ...

SSK-20

Active guard/ high-temperature sour shift catalyst SSK-20 is a cobalt-molybdenum (CoMo)-based ...

HTZ-1

Reliable high-density zinc oxide absorbent for removal of hydrogen sulfide.

TK-6001 HySwell™

TK-6001 HySwell™ is our new ultra high-activity NiMo catalyst for maximum volume swell.

RC-67 TITAN™

Titania-promoted reforming catalyst used for tubular reforming.

RKC-2-7H

Bulk catalyst for secondary and autothermal reforming.

SC-502 Purify™

Developed for application in low temperature natural gas and CO2 streams.

TK-18 TopTrap™

TK-18 TopTrap™ is an inert, reticulated, macroporous material designed to pick up particulates, scales, and other contaminants.

TK-22 TopTrap™

TK-22 TopTrap™ is an inert, reticulated, macroporous material designed to pick up particulates, scales, and other contaminants.

TK-24 TopTrap™

TK-24 TopTrap™ is an inert, reticulated, macroporous material designed to pick up particulates, scales, and other contaminants.

RK-500 TITAN™

Titania-promoted reforming catalyst used for tubular reforming.

ST-201R

Copper and zinc oxide-based absorbent for removal of hydrogen sulfide and organic sulfur compounds.

MK-181 PRIME™

High performance methanol synthesis catalyst suitable for production of renewable methanol.

TK-342

TK-342 is a renewable hydrotreating catalyst developed for fixed-bed hydrodeoxygenation (HDO) service.

TK-330

TK-330 is a renewable hydrotreating catalyst developed for fixed-bed hydrodeoxygenation (HDO) service.

TK-3000

TK-3000 PhosTrap™ is a renewable hydrotreating catalyst developed for fixed-bed hydrodeoxygenation (HDO) service.

VK38+

VK38+ is a new potassium-promoted catalyst from Topsoe that has been proven to have higher activity ...

for optimal performance