RNG | Feed Purification

In the feed purification process step, the final removal of contaminants takes place. Any organic sulfurs are hydrogenated and later absorbed together with any hydrogen sulfide or carbonyl sulfide in the feed. Chlorine and other halogens are also absorbed and removed from the gas feed. Reliable and well-functioning feed purification is essential for ensuring optimal performance of downstream catalysts and a high on-stream factor of the entire facility.

HTG-10

Potassium and alumina-based high capacity chloride absorbent used for removal of hydrogen chloride ...

HTZ-51

State-of-the-art promoted zinc oxide absorbent for low sulfur feedstocks or low temperature ...

TK-261

High activity NiMo-based hydrogenation catalyst used in ammonia, methanol and hydrogen plants.

Catalyst Loading

Topsoe’s CatalysLoading service gives you valuable pre-loading and loading guidance that can help ...

General Technical Service

Topsoe’s General Technical Service employs the full weight of our knowledge and experience to ...

Internal Visual Inspection

A Topsoe Internal Visual Inspection is your first line of defense against faults in valves, piping, ...

Plant Assessment / Optimization

A Topsoe Plant Assessment/Optimization can identify and help you solve issues standing in the way ...

Sampling & Analysis

Our Sampling & Analysis service is your direct route to the detailed insight it takes to make ...

Start-up & Reduction / Activation

Our Start-up & Reduction/Activation service supports you before, during and after start-up to make ...

Troubleshooting

Our Troubleshooting service draws on the full range of Topsoe’s insight into catalysts, equipment ...

Project development

We facilitate all relevant contracts to meet both the debt and the equity financing requirements.