Skip to content


for optimal performance


SNG methanation catalyst

The MCR-2 SNG methanation catalyst is used for medium to high-temperature applications in SNG plants. MCR-2 is pre-reduced to ensure a high activity and to save valuable time during start-up.

MCR-2 is used in combination with the GCC-2 gas conditioning catalyst in TOPSOE™’s TREMPTM SNG process. For methanation at lower temperatures, the PK-7R methanation catalyst is used.

Benefits of the GCC and MCR partnership

In coal or petcoke based SNG plants, the process steps of TOPSOE™’s TREMPTM technology are gas cleaning, gas conditioning, and methanation. There are numerous benefits for incorporating gas conditioning (GCC) prior to the methanation step, as described in the below.

High operational reliability

With the GCC, the more expensive methanation catalyst performs under more optimal conditions and is better protected against risks such as low-temperature carbon formation. The GCC catalyst also acts as an additional sulfur guard. Ultimately, TOPSOE™’s GCC design optimizes catalyst volume and performance for the entire unit.

Increased conversion per pass

Compared to other methanation technologies, the GCC design extends the operational range, allowing for a larger and therefore more favorable temperature increase. This translates into a higher conversion per pass, since the amount of CH4 produced is proportional to the temperature increase.

Reduced costs

Due to the improved conversion, less dilution and therefore a lower recycle flow is required. This results in significant cost savings in CAPEX and OPEX for both equipment and catalysts.

High-pressure steam production

The synergy of the GCC and MCR partnership maximizes the production of superheated HP steam at minimal cost.