A well-functioning methanation section is vital for the optimal operation of the downstream synthesis section. Our process design makes the best possible use of our highly active and energy efficient methanation catalysts, thereby ensuring optimal performance.
Catalysts
Equipment
Equipment
The proprietary equipment we supply for this application are listed below.
EquipmentAdiabatic Reactor Bottom Support Grid
Increase your profitability with Topsoe’s support grid to obtain a lower pressure drop in your adiabatic reactors such as the high, medium, low-temperature shift or the methanator. Achieve a pressure drop which is up to 50% lower. Worldwide, more than 20 reactors already have this technology...
Services
Services
The services we supply for this application are listed below.
ServicesCatalyst Loading
All plants – even those with lots of turnaround experience – can run into trouble during loading. When a problem occurs, it can lead to longer turnarounds and, in the worst case, result in an underperforming catalyst. That makes proper loading an important step in profitable plant operation. Topsoe...
ServicesGeneral Technical Service
Optimal interaction between catalyst and technology is crucial if your plant is to perform at its best. Topsoe’s General Technical Service employs the full weight of our knowledge and experience to advise, inform and guide you towards improvement. All General Technical Service is provided as in-...
ServicesInternal Visual Inspection
A Topsoe Internal Visual Inspection is your first line of defense against faults in valves, piping, boilers, heat exchangers and adiabatic catalytic reactors, or even larger systems such as steam reformers. As a key component in your preventative maintenance program, an Internal Visual Inspection...
ServicesPlant Assessment / Optimization
Refineries and chemical plants are complex and vulnerable to changes over time. These changes can degrade performance and impact negatively on day-to-day operations and, ultimately, your bottom line. Whether you choose a catalyst performance evaluation or full-scale process and catalyst...
ServicesSampling & Analysis
As a general rule, the more you know about a plant or unit’s operating conditions, the better you’ll be able to keep performance, cost-efficiency and profits high. Our Sampling & Analysis service is your direct route to the detailed insight it takes to make better decisions. During start-ups...
ServicesStart-up & Reduction / Activation
Starting up your plant or unit is a complicated and time-consuming procedure that involves monitoring numerous parameters and ensuring the right start-up sequencing. If not performed correctly, it can result in delays or even damage to your catalysts, unit or plant. Our Start-up & Reduction/...
ServicesTroubleshooting
Catalysts and processes normally operate smoothly, yet suboptimal performance can occur from time to time. Since most issues have multiple root causes – usually originating in external factors – the process of solving an issue can be difficult and complex. Our Troubleshooting service draws on the...
Project development
Project development
Project development servicesFacilitating Investments
Benefit from the extensive experience of our project finance teams.
Project development servicesProject development
Holistic and integrated approach from idea to financial close.
